QD Pumptec

Exclusively designed for Franklin QD Relay Control Boxes, QD Pumptec is a solid state sensing device that monitors motor load and incoming power to automatically shut off a Franklin single-phase, 3-wire motor when related fault conditions are detected. QD Pumptec easily plugs into 3-wire Franklin QD Control Boxes with no additional wiring or tools required.

• QD Pumptec allows the user to choose the standard factory calibration for underload or to calibrate to a particular system. Control knobs make it easy to adjust sensitivity and timeout sessions.
• QD Pumptec easily plugs into 3-wire QD Relay Control Boxes in minutes, without additional wiring or tools.

Pumptec

Pumptec is a microcomputer-based device that monitors motor load and power line conditions to provide protection against dry well conditions, waterlogged tanks, and abnormal line voltage conditions. Pumptec interrupts power to the motor whenever the load drops quickly or below a preset level. Indicator lights provide complete system status.

• Easily adjustable sensitivity settings
• Run and fault indicator lights
• Heavy duty relay
• Alarm circuit contacts
• UL/CSA Listed

Pumptec-Plus

The Pumptec-Plus solid state pump protection system is designed for 1/2 to 5 hp single-phase submersible
pump motors. Pumptec-Plus protects against a variety of fault conditions. Run and fault lights make diagnosis quick and easy. Push button Snap Shot™ calibration makes Pumptec-Plus simple to install and an effective troubleshooting tool.

• Push button calibration
• Run and fault indicator lights
• Heavy duty (30A) contractor
• Works with PSC, split-phase CSCR and CSIR motors
• UL/CSA listed

Franklin Drive Family Comparison

			QD Pumptec	Pumptec	Pumptec Plus	SubDrive Utility	MonoDrive Utility	MonoDrive/ MonoDriveXT NEMA 4	SubDrive 75/100/150/300 NEMA 4	MonoDrive/ MonoDriveXT Connect	SubDrive 15/20/30/50 Connect
Submersible Motors	1-PHASE 2-WIRE	115V 1/3 hp		x		x
		115V 1/2 hp		x		x
		230V 1/3 hp		x	x	x
		230V 1/2 hp		x	x	x
		230V 3/4 hp		x	x	x
		230V 1 hp		x	x	x
		230V 1.5 hp		x	x	x
	1-PHASE 3-WIRE	115V 1/3 hp	x	x
		115V 1/2 hp	x	x
		230V 1/3 hp	x	x	x
		230V 1/2 hp	x	x	x		x	x		x	x
		230V 3/4 hp	x	x	x		x	x		x	x
		230V 1 hp	x	x	x		x	x		x	x
		230V 1.5 hp		x	x		x	x		x	x
		230V 2 hp			x		x	x		x	x
		230V 3 hp			x						x
		230V 5 hp			x
	3-PHASE	230V 1 hp									x
		230V 1.5 hp							x		x
		230V 2 hp							x		x
		230V 3 hp							x		x
		230V 5 hp							x		x
Surface Pumps	1-PHASE 2-WIRE	115V 1/3 hp				x
		115V 1/2 hp				x
		115V 3/4 hp				x
		115V 1 hp				x
		230V 1/3 hp				x
		230V 1/2 hp				x
		230V 3/4 hp				x
		230V 1 hp				x
		230V 1.5 hp				x
		230V 2 hp				x
	3-PHASE	230V 1/3 hp									x
		230V 1/2 hp									x
		230V 3/4 hp									x
		230V 1 hp									x
		230V 1.5 hp									x
		230V 2 hp									x
		230V 3 hp									x
		230V 5 hp									x
		CONSTANT PRESSURE				x	x	x	x	x	x
Protection/ Features	Protection	Underload	x	x	x	x	x	x	x	x	x
		Undervoltage	x	x	x	x	x	x	x	x	x
		Overvoltage	x	x	x	x	x	x	x	x	x
		Rapid Cycle		x	x		Soft Start	Soft Start	Soft Start	Soft Start	Soft Start
		Overload / Locked Pump	x	x	x	x	x	x	x	x	x
		Open Circuit				x	x	x	x	x	x
		Short Circuit				x	x	x	x	x	x
		Phase Imbalance								x	x
	Input/ Output/ Control	Pressure Sensor (Hobbs)				x	x	x	x	x	x
		Pressure Transducer (4-20mA)				x	x			x	x
		Run Relay Output						Accessory	Accessory or SubDrive300	x	x
		Fault Relay Output							SubDrive300	x	x
		Broken Pipe				x	x			x	x
		Pressure Sensor Error				x	x			x	x
		Auxiliary Control								x	x
		Wet Floor Sensor								x	x
		Built-In Duplex Alternator								x	x
		Mobile App Advanced Configuration								x	x
		Diagnostic Fault History								x	x
		Real-Time Monitoring								x	x