SubDrive & MonoDrive NEMA 4

SubDrive & MonoDrive NEMA 4

Constant Pressure Variable Frequency Drives (VFD)

From residential to agricultural and commercial applications, Franklin Electric’s SubDrive family of variable frequency drives (VFDs) offer a cost-effective, easy-to-install upgrade to traditional systems.

Designed within a NEMA 4 weatherproof enclosure, they offer rugged, watertight variable frequency drive solutions that meets water demand changes.

Features
Order Info
Specs & Accessories
Downloads

  • Features and Benefits

    • Constant water pressure with a wide range of settings (25 to 80 psi)
    • Easy, plug-and-play installation
    • NEMA 4 enclosure options (indoor/outdoor) offers robust protection against harsh environmental conditions
    • Single-phase input, 3-wire motor control
    • Smooth running
    • High starting torque
    • Soft-start feature prevents water hammer and increases motor life
    • Works with small pressure tanks or existing larger tanks
    • Advanced filtering to remove radio frequency interference
    • Built-in diagnostics and protection
    • Surge Protection
    • Short circuit
    • Underload
    • Overheated controller
    • Undervoltage
    • Broken pipe detection (SubDrive Connect only)
    • Locked pump
    • User-configurable underload off time (SubDrive Connect only)
    • Open circuit
    • Easily replaceable fan kit
    • UL and cUL listed

    SubDrive NEMA 4

    SubDrive75, SubDrive100, SubDrive150, and SubDrive300 controllers are designed for three-phase motors to provide constant pressure with three-phase performance using single-phase input power for 1-1/2 – 5 hp jobs.

    MonoDrive and MonoDrive XT NEMA 4

    MonoDrive and MonoDriveXT are designed to convert a conventional ½ hp to 2 hp pump system to a variable speed constant pressure system by simply replacing the 3-wire control box and pressure switch.

    Franklin Drive Family Comparison

    Submersible Motors
    PhaseVoltsHorsepowerQD
    Pumptec    		PumptecPumptec
    Plus    		SubDrive
    Utility
    UT2W    		SubDrive
    Utility
    UT3P    		MonoDrive/
    MonoDriveXT
    NEMA 4    		SubDrive
    75/100/150/300
    NEMA 4    		SubDrive
    20/30/50
    Connect    		SubDrive
    Connect Plus
    1-Phase
    2-Wire    		115 V1/3 - 1/2 hpxx
    230 V1/3 - 1.5 hpxxx
    1-Phase
    3-Wire    		115 V1/3 - 1/2 hpxx
    230 V1/3 hpxxx
    1/2 - 1 hpxxxxxx
    1.5 hpxxxxx
    2 hpxxxx
    3 - 5 hpx
    3-Phase230 V1/2 hpx
    1 - 2 hpxxx
    1.5 - 5 hpxxx
    5 - 15 hpx
    460 V1/2 - 30 hpx
    Surface Pumps
    PhaseVoltsHorsepowerQD
    Pumptec    		PumptecPumptec
    Plus    		SubDrive
    Utility
    UT2W    		SubDrive
    Utility
    UT3P    		MonoDrive/
    MonoDriveXT
    NEMA 4    		SubDrive
    75/100/150/300
    NEMA 4    		SubDrive
    20/30/50
    Connect    		SubDrive
    Connect Plus
    1-Phase
    2-Wire    		115 V1/3 - 1 hpx
    230 V1/3 - 2 hpx
    3-Phase230 V1/2 - 2 hpxxx
    3 - 5 hpxx
    5 - 15 hpx
    460 V1/2 - 30 hpx
    Features and Protection
    SpecificationsQD
    Pumptec    		PumptecPumptec
    Plus    		SubDrive
    Utility
    UT2W    		SubDrive
    Utility
    UT3P    		MonoDrive/
    MonoDriveXT
    NEMA 4    		SubDrive
    75/100/150/300
    NEMA 4    		SubDrive
    20/30/50
    Connect    		SubDrive
    Connect Plus
    FeaturesConstant Pressurexxxxxx
    ProtectionRatingNEMA 3RNEMA 3RNEMA 3RNEMA 3RNEMA 4NEMA 4NEMA 3RNEMA 3R
    Underloadxxxxxxxxx
    Under/Over Voltagexxxxxxxxx
    Rapid CyclexxSoft StartSoft StartSoft StartSoft StartSoft Start
    Overload/
    Locked Pump    		xxxxxxxxx
    Open Circuitxxxxxx
    Short Circuitxxxxxx
    Phase Imbalancexxx
    Input/
    Output/
    Control    		Pressure Sensor
    (Hobbs)    		xxxxxx
    Pressure Transducer
    (4-20mA)    		xxxx
    Run Relay OutputAccessoryAccessory or
    SubDrive300    		xx
    Fault Relay Outputxx
    Broken Pipexxxx
    Pressure Sensor Errorxxxx
    Auxilliary ControlxRun/Stop
    Hand/Auto
    Wet Floor Sensor



    		xx
    Lead/Lag/AlternateAccessory,
    2 Drives    		Accessory,
    2 Drives    		Accessory,
    2 Drives    		Accessory,
    2 Drives    		Built-in,
    2 Drives    		Built-in,
    up to 8 Drives
    Mobile Appxx

  • SubDrive & MonoDrive NEMA 4 Variable Frequency Drives

    VFDEnclosure TypeModel No.
    MonoDrive NEMA 4 VARIABLE FREQUENCY5870203114
    MonoDriveXT NEMA 4 VARIABLE FREQUENCY5870204114
    SubDrive 75 NEMA 4, VARIABLE FREQUENCY5870203384
    SubDrive 100 NEMA 4, VARIABLE FREQUENCY5870204104
    SubDrive 150 NEMA 4, VARIABLE FREQUENCY5870204154
    SubDrive 300 NEMA 4, VARIABLE FREQUENCY5870206300
    • NEMA 4 enclosure (indoor/outdoor) offers robust protection against harsh environmental conditions

  • SubDrive & MonoDrive NEMA 4 Accessories

    AccessoriesDetailUsed WithPart No.
    Duplex AlternatorAllows a water system to alternate between two parallel pumps controlled by separate drives. All Models5850012000
    Must use pressure sensor; not compatible with analog pressure transducer
    Filter (Input)Filter used on the input side of the drive to help eliminate interferenceAll Models225198901
    Filter (Input AMR)Filter used on the input side of the drive to help eliminate
    interference with automated meter reading systems.    		All models (excluding SubDrive30/50,
    SubDrive150, and SubDrive300)    		226030901
    Filter (Input IGF)Filter used in the input side of the drive to help eliminate interference on the ground wireAll models226035901
    Filter (Output)Filter used on the output side of the drive to help eliminate interferenceAll Models (excluding SubDrive300)225300901
    Filter (Surge Capacitors)3-lead Capacitor used on the service panel to help eliminate interferenceAll Models225199901
    4-lead Capacitor used on the service panel to help eliminate interference.
    Additional ground lead suitable for subpanel installation and effective against LED lighting interference.    		All Models225199902
    Heatsink Cover KitAssists in preventing critters from entering and blocking the fan areaAll NEMA 4 models (excluding SubDrive300)225805901
    Lightning ArrestorProvides additional surge suppression on the single-phase input power side of the driveAll Models150814902
    Low Voltage KitMake adjustments to the input voltage of the SubDrive300 in low voltage applicationsSubDrive300225950901
    NEMA 4 Cooling Fan Replacement KitReplacement External fanSubDrive75 and MonoDrive NEMA 4225635901
    SubDrive100/150 and MonoDriveXT NEMA 4225635902
    Replacement External fan (includes 2 fans)SubDrive300225635903
    Replacement Internal Stirring fanAll NEMA 4 models225635904
    NEMA 4 Auxiliary Relay BoardOffers Run-Indication Relay (date code 09J and after)All NEMA 4 models(excluding SubDrive300)225755901
    NEMA 4 Option CardOffers Run-Indication Relay and Underload Extended
    Off-Time Adjustment (date code 09J and after)    		All NEMA 4 models (excluding SubDrive300)225880901
    Pressure SensorHigh Pressure 75-150 PSI - NSF Rated
    Adjusts pressure in the watersystem from 75-150 PSI (2-leaded 10 ft cable included)    		All Models225970901
    Standard Pressure 25-90 PSI - NSF Rated
    Adjusts pressure in the watersystem from 25-80 PSI (2-leaded 10 ft cable included)    		All Models223995901
    Pressure Sensor/High Pressure Shut-Off KitIncludes pressure sensor (25-80 PSI), high pressure shut-off sensor (100 PSI), and 4-leaded 10 ft cableSubDrive300225495901
    Sensor Cable KitIndoor, 100 feet of 22 AWG cable (2-leaded)All Models (excluding SubDrive300)223995902
    Indoor, 100 feet of 22 AWG cable (4-leaded)SubDrive300225495902
    Outdoor, 100 feet of 22 AWG cable (2-leaded)All Models (excluding SubDrive300)226941901
    Sensor Direct Burial CableDesigned to run in an underground trench without conduitAll Models - 10 ft (3 m)225800901
    All Models - 30 ft (9 m)225800902
    All Models - 100 ft (30 m)225800903
    Tank Drawdown KitAllows the use of water stored in the during low flow demandsSubDrive15/20/30/50 and MonoDrive/MonoDriveXT Connect, and SubDrive300225770901
    SubDrive75/100/150 and MonoDrive/MonoDriveXT NEMA 4 (requires Auxiliary Relay Board or NEMA 4 Option Card kit)225770901
    • N3R = NEMA 3R (Indoor/Outdoor), N4 = NEMA 4 (Outdoor)

    SubDrive75 and SubDrive100

    NEMA 4SubDrive75SubDrive100
    Indoor/OutdoorModel No.58702033845870204104
    Input from
    Power Source    		Voltage190-260 VAC190-260 VAC
    Phase InSingle-phaseSingle-phase
    Frequency60/50 Hz60/50 Hz
    Current (max)19 Amps (RMS)19 Amps (RMS)
    Power Factor1.0 (constant)1.0 (constant)
    Power (idle)65 Watts65 Watts
    Power (max)3800 Watts3800 Watts
    Wire Gauge Size(s)Consult Federal, State, and Local codes for branch circuit installationsConsult Federal, State, and Local
    codes for branch circuit installations
    Output to MotorVoltageAdjusts with FrequencyAdjusts with Frequency
    Phase OutThree-phase (3-wire)Three-phase (3-wire)
    Frequency Range30-80 Hz (1 hp, 0.75 kW) pump30-80 Hz (1 hp, 0.75 kW) pump
    30-70 Hz (1.5 hp, 1.1 kW) pump30-70 Hz (1.5 hp, 1.1 kW) pump
    30-60 Hz (2 hp, 1.5 kW) pump30-60 Hz (2 hp, 1.5 kW) pump
    Current (max)8.1 Amps (RMS, each phase)8.1 Amps (RMS, each phase)
    Wire Gauge Size(s)#6 - #18* ga.#6 - #18 * ga.
    Pressure SettingFactory Preset50 psi (3.4 bar)50 psi (3.4 bar)
    Adjustment Range25-80 psi (1.7 - 5.5 bar)25-80 psi (1.7 - 5.5 bar)
    Operating
    Conditions(A)    		Temperature
    (at 230 VAC input)    		-13 °F to 125 °F (-25 °C to 50 °C)-13 °F to 125 °F (-25 °C to 50 °C)
    Relative Humidity0-100%, condensing0-100%, condensing
    Controller Size(B)
    (approximate)    		Outer Dimensions17-1/2" x 16-3/8" x 11-3/8" (44.45 x 41.59 x 28.89 cm)17-1/2” x 16-3/8” x 11-3/8”
    (44.45 x 41.59 x 28.89 cm)
    28.32 lbs (12.84 kg)
    Weight 28.32 lbs (12.84 kg) 28.32 lbs (12.84 kg)
    For Use With(C)Pump (60 Hz)3/4 hp (0.55 kW) [default]
    1.0 hp (0.75 kw)
    1.5 hp (1.1 kW)    		1 hp (0.75 kW) [default]
    1.5 hp (1.1 kW)
    2 hp (1.5 kW)
    FE Motor234514-Series (1.5 hp, 1.1 kw)234315 - series (2 hp, 1.5 kW)
    • Notes: Refer to Franklin Electric’s SubDrive/MonoDrive Installation Manual.
    • (A) Operating temperature is specified at full output power when installed as described in Controller Location Selection.
    • (B) Refer to detailed Mounting Dimensions.
    • (C) If a pump other than the default rating is used, refer to Drive Configuration.
    • * Refer to detailed Circuit Breaker and Wire Sizing charts.

    SubDrive150 and SubDrive300

    NEMA 4SubDrive150SubDrive300
    Indoor/OutdoorModel No.58702041545870206300
    Input from
    Power
    Source    		Voltage190-260 VAC220-260 VAC
    Phase InSingle-phaseSingle-phase
    Frequency60/50 Hz60/50 Hz
    Current (max)23 Amps (RMS)36 Amps (RMS)
    Power Factor1.0 (constant)1.0 (constant)
    Power (idle)65 Watts65 Watts
    Power (max)4600 Watts7200 Watts
    Wire Gauge
    Size(s)    		Consult Federal, State, and Local
    codes for branch circuit installations    		Consult Federal, State,
    and Localcodes for
    branch circuit installations
    VoltageAdjusts with FrequencyAdjusts with Frequency
    Output
    to Motor    		Phase OutThree-phase (3-wire)Three-phase (3-wire)
    Frequency
    Range    		30-80 Hz (1.5 hp, 1.1 kW) pump30-80 Hz
    (3 hp, 2.2 kW) pump
    30-70 Hz
    (5 hp, 3.7 kW) pump
    30-70 Hz (2 hp, 1.5 kW) pump
    30-60 Hz (3 hp, 2.2 kW) pump
    Current (max)10.9 Amps (RMS, each phase)17.8 Amps (RMS, each phase)
    Pressure
    Setting    		Wire Gauge
    Size(s)    		#6 - #18 * ga.#2 - #18 * ga.
    Factory preset50 psi (3.4 bar)50 psi (3.4 bar)
    Adjustment
    Range    		25-80 psi (1.7 - 5.5 bar)25-80 psi (1.7 - 5.5 bar)
    Operating
    Conditions(A)    		Temperature
    (@ 230 VAC input)    		-13 °F to 125 °F (-25 °C to 50 °C)-13 °F to 125 °F
    (-25 °C to 50 °C)
    Relative
    Humidity    		0-100%, condensing0-100%, condensing
    Controller
    Size(B)
    (approximate)    		Outer
    Dimensions     		17-1/2" x 16-3/8" x 11-3/8"
    (44.45 x 41.59 x 28.89 cm)     		19-7/8” x 17-1/2” x 14-1/4”
    (50.48 x 44.45 x 36.20 cm)
    Weight28.32 lbs (12.84 kg)35.15 lbs (15.94 kg)
    For Use
    With(C)    		Pump (60 Hz)1.5 hp (1.1 kW) [default]
    2 hp (1.5 kW)
    3 hp (2.2 kW)    		3 hp (2.2 kW) [default]
    5 hp (3.7 kW)
    FE Motor234316 - series (3 hp, 2.2 kW)234317-series
    (5 hp, 3.7 kW)
    • Notes: Refer to Franklin Electric’s SubDrive/MonoDrive Installation Manual.
    • (A) Operating temperature is specified at full output power when installed as described in Controller Location Selection.
    • (B) Refer to detailed Mounting Dimensions.
    • (C) If a pump other than the default rating is used, refer to Drive Configuration.
    • * Refer to detailed Circuit Breaker and Wire Sizing charts.

    MonoDrive and MonoDrive XT (NEMA 4)

    NEMA 4MonoDriveMonoDriveXT
    Indoor/OutdoorModel No.58702031145870204114
    Input from
    Power Source    		Voltage190-260 VAC190-260 VAC
    Phase InSingle-phaseSingle-phase
    Frequency60/50 Hz60/50 Hz
    Current (max)5.7 Amps (RMS) 1/2 hp, 0.37 kW system
    8.7 Amps (RMS) 3/4 hp, 0.55 kW system
    11 Amps (RMS) 1 hp, 0.75 kW system
    		13 Amps (RMS) 1.5 hp, 1.1 kW system
    16 Amps (RMS) 2 hp, 1.5 kW system
    Power Factor1.0 (constant)1.0 (constant)
    Power (idle)35 Watts65 Watts
    Power (max)1150 Watts (1/2 hp, 0.37 kW) system
    1750 Watts (3/4 hp, 0.55 kW) system
    2150 Watts (1 hp, 0.75 kW) system    		2500 Watts (1.5 hp, 1.1 kW) system
    3100 Watts (2 hp, 1.5 kW) system
    Wire Gauge Size(s)Consult Federal, State, and Local codes
    for branch circuit installations    		Consult Federal, State, and
    Local codes for branch
    circuit installations
    Output to MotorVoltageAdjusts with FrequencyAdjusts with Frequency
    Phase OutSingle-phase (3-wire)Single-phase (3-wire)
    Frequency Range30-60 Hz30-60 Hz
    Current (max)Main Phase: 6 Amps (RMS) 1/2 hp, 0.37 kW system
    Main Phase: 8 Amps (RMS) 3/4 hp, 0.55 kW system
    Main Phase: 10.4 Amps (RMS) 1 hp, 0.75 kW system    		Main Phase: 11.5 Amps (RMS) 1.5 hp, 1.1 kW system
    Main Phase: 13.2 Amps (RMS) 2 hp, 1.5 kW system
    Wire Gauge Size(s)#6 - #18 * ga.#6 - #18 * ga.
    Pressure SettingFactory Preset50 psi (3.4 bar)50 psi (3.4 bar)
    Adjustment Range25-80 psi (1.7 - 5.5 bar)25-80 psi (1.7 - 5.5 bar)
    Operating
    Conditions(A)    		Temperature
    (at 230 VAC input)    		-13 °F to 125 °F (-25 °C to 50 °C)-13 °F to 125 °F (-25 °C to 50 °C)
    Relative Humidity0-100%, condensing0-100%, condensing
    Controller Size(B)
    (approximate)    		Outer Dimensions17-1/2” x 16-3/8” x 11-3/8”
    (44.45 x 41.59 x 28.89 cm)    		17-1/2” x 16-3/8” x 11-3/8”
    (44.45 x 41.59 x 28.89 cm)
    Weight24.14 lbs (10.95 kg)28.32 lbs (12.84 kg)
    For Use With(C)Pump (60 Hz)0.5 hp (0.37 kW) pump with 214505-series motor
    0.75 hp (0.55 kW) pump with 214507-series motor
    1.0 hp (0.75 kW) pump with 214508-series motor    		1.0 hp (0.75 kW) pump with 214508-series motor
    1.5 hp (1.1 kW) pump with 224300-series motor
    2.0 hp (1.5 kW) pump with 224301-series motor
    FE Motor214505-series (0.5 hp, 0.37 kW) single-phase, 3-wire
    214507-series (0.75 hp, 0.55 kW) single-phase, 3-wire (default)
    214508- series (1.0 hp, 0.75 kW) single-phase, 3-wire    		214508-series (1.0 hp, 0.75 kW) single-phase, 3-wire
    224300-series (1.5 hp, 1.1 kW) single-phase, 3-wire (default)
    224301-series (2.0 hp, 1.5 kW) single-phase, 3-wire
    • Notes: Refer to Franklin Electric’s SubDrive/MonoDrive Installation Manual.
    • (A) Operating temperature is specified at full output power when installed as described in Controller Location Selection.
    • (B) Refer to detailed Mounting Dimensions.
    • (C) If a pump other than the default rating is used, refer to Drive Configuration.
    • * Refer to detailed Circuit Breaker and Wire Sizing charts.

  • Catalogs

    Brochures

    Manuals

    Kit Information

    Other