93806603C – 90PMQP-5.0HP-3RC
Item: | 93806603C |
Model: | 90PMQP-5.0HP-3RC |
Type | Water Well |
Ratings |
|
Phases | Three-Phase |
Amps - Service Factor | 13.9 A |
Volts | 230 VAC |
Voltage Tolerance (%) | -10.0% / +10.0% |
Wire | 3-Wire |
Thrust Bearing Rating | 1500 lb |
Motor | Submersible |
Continuous Duty | Yes |
Hz | 50/60 Hz |
Input Phase | Single-Phase |
Output Phase | Three-Phase & Single-Phase 3-Wire |
Input Power Factor | 0.95 |
Input Power Max | 7200 W |
Input voltage single phase (VAC) | 208/230 VAC |
Lead Retainer Method | Lead Jam Nut |
Minimum Motor HP (1 Phase, 3 Wire) | 0.5 @ 230 VAC |
Maximum Motor HP (1 Phase, 3 Wire) | 3 @ 230 VAC |
Minimum Output Amps (1 Phase, 3 Wire) | 2.0 @ 230VAC |
Maximum Output Amps (1 Phase 3 Wire) | 17.0 @ 230VAC |
Minimum Output Amps (3 Phase) | 2.0A @ 230 VAC |
Maximum Output Amps (3 Phase) | 17.8 @ 230 VAC |
Minimum Output Frequency | 15Hz (CEN), 30Hz (SUB) |
Maximum Output Frequency | 60Hz (CEN), 80Hz (SUB) |
Maximum Output Current | 13.9 A |
Output Voltage - 1 Phase, 3 Wire (VAC) | 230 VAC |
Output Voltage - 3 Phase (VAC) | 230 VAC |
S.F. | 1.15 |
HP | 5 hp |
Flow | 90 gpm |
Shut Off 60 Hz | 220 ft |
Stages | 8 |
Pressure Sensor Included | No |
Pressure Transducer Included | YES |
Motor Ambient Temperature Rating Nominal | 86 °F |
Thrust Bearing Rating | 1500 lb |
Enclosure Rating | Type 3R |
Minimum Operating Temperature | -13 °F |
Maximum Operating Temperature | 122 °F |
Pressure Transducer Included | YES |
Storage Temperature | -13° to 144 °F (-25° to 65 °C) |
Liquid |
|
Maximum Fluid Temperature | 120 °F |
Materials of Construction |
|
Pump Body Material | AISI 304 Stainless Steel |
Discharge Head Material | Stainless Steel |
Impeller Material | Acetal |
Motor Bracket Material | Stainless Steel |
Check Valve | No |
Intake Screen Material | Stainless Steel |
Thrust Bearing | Kingsbury |
Seal | Lip Seal Ring |
Lead Insulation Material | XLPE |
Cable Guard Material | Stainless Steel |
Diaphragm Material | Nitrile Rubber (NBR) |
Flow Switch Included | NO |
Motor Construction Design | Super Stainless |
Shaft Slinger Material | Nitrile Rubber (NBR) |
Stator/ Motor Shell Material | Stainless Steel |
Shelf Life | 1.5 year |
Dimensions |
|
Discharge | Threaded - FNPT |
Discharge Diameter | 2 " |
Diameter With Cable Guard | 3.9 " |
Motor Length | 15.4 " |
Pump Length | 31.4 " |
Carton Length | 34.25 " |
Carton Width | 12.06 " |
Carton Height | 21.38 " |
Shaft End | Spline |
Other |
|
Component Drive Part Number | 5870205503C |
Component Motor Part Number | 2340543432S |
Component Pump Part Number | 93659008 |
Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
Electrical Agency Approvals | cUL Listed / UL |
Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |