10" Rewindable Submersible Motors

10" Rewindable Submersible Motors

These 10" rewindable motors, manufactured in ISO 9001 certified facilities, are built for dependable operation in 10" diameter or larger water wells. It is fitted with water lubricated radial and thrust bearings for maintenance-free operation. The motor is filled with a special FES93 fluid, providing frost protection down to -15 ºC storage temperature. A special diaphragm ensures pressure compensation inside the motor. The Sand fighter® SiC seal system is standard. For applications in aggressive media, motors made of 316 SS and 904 L are available.

Features
Order Info
Specs & Accessories
Downloads
  • Features & Benefits

    • Easy to assemble with double flange
    • Cable material according to drinking water regulations (VDE/ACS/KTW approved)
    • Sand fighter® SiC seal system for high performance in sand
    • High efficiency electrical design for low operation cost
    • All motors prefilled and 100% tested
    • Max. storage temperature 5 °F (-15 °C) to 140 °F (60 °C)
    • Design for retrofitable PT100 sensor
    • Non contaminating FES 93 filled design

    Options

    • Other voltages
    • Y∆ - start (pos. of cables 90°)
    • Motors in complete 316 SS and 904 L
    • PT 100 temperature sensor (sold separately)
    • Lead in different lengths up to 165 ft. (50 m)

    Technical Specifications

    • 10" Three-Phase Motors, 2-Pole, 3600 RPM
    • 130-185 kW / 175-250 hp
    • 10" flange
    • IP 68 protection
    • 10 maximum starts per hour
    • Vertical and horizontal installation (excluding 185 kW / 250 hp motors)
    • Motor Lead in 20 ft. (6 m) length
    • 380-415 V/50 Hz, 460 V/60 Hz, and 575 V/60 Hz standard voltages
    • Voltage tolerance (50 Hz): -10% / +6% UN [380-415V = (380-10%) – (415+6%)]
    • Voltage tolerance (60 Hz): ±10% UN
    • PE2/PA winding insulation for max. ambient temp. of 113 °F (45 °C) at the same cooling conditions as standard
  • PN (kW/HP)UN / fModel No. Digit 1 – 6Model No. Digit 7 – 10
    VHzDOLY∆PE2/PA21
    304316 SS904 L
    130/175460/38060/50264 134264 234532163217321
    57560264 564264 864
    150/200460/38060/50264 135264 235
    57560264 565264 865
    185/250460/38060/50264 136264 236
    57560264 566264 866
    380-41550264 136264 236
    460/38060/50264 136264 236
    38060-264 766
  • Motor Leads

    DOL
    PN (kW/HP)Ø (mm²)B / H (mm/in)L (m/ft)Qyt.LeadLead Seal KitLead SealKit
    Mod.- Nr.304/316 Mod.- Nr.904 L Mod.- Nr.
    130/1754G35B48.5/1.916/201308 710 117308 660 721308 660 725
    H16.5/.65
    110-150/150-200 (PE2/PA)3X50B46.5/1.836/201308 710 113308 660 712308 660 726
    H19.5/0.77
    185/250**1X70D20.7/0.826/203308 711 000308 660 732308 660 733
    • NOTE: For PE2/PA engines additionally the special Tape 700 541 688 is absolutely necessary
    Y∆
    PN (kW/HP)Ø (mm²)B / H (mm/in)Lengths (m/ft)Qyt.Lead Mod.- Nr.Lead seal Kit 304/316 Mod.- Nr.Lead seal Kit 904 L Mod.- Nr.
    10-150/150-2003X25B37.5/1.486/201308 710 114308 660 713308 660 728
    H6/0.63
    4G25B44.3/1.741
    H14.5/0.57
    185 /2504G35B48.5/1.916/201308 710 121308 660 723308 660 729
    H6.5/0.65
    3X35B38.5/1.521
    H16.5/0.65
    • NOTE: For PE2/PA engines additionally the special Tape 700 541 688 is absolutely necessary

    Technical Data

    Stator and Rotor (50/60 Hz)
    PN (kW/HP)Stator (incl. winding and 6 m motor lead)Rotor
    UN / f304/316904 L304/316904 L
    VHzDOL PE2/PADOL PE2/PAY∆ PE2/PAY∆ PE2/PA
    130/175460/38060/50326314931326314921326314981326314971176 379 803K
    57560326317931326317921326317981326317971
    150/200460/38060/50326325931326325921326325981326325971176 379 804K
    57560326327931326327921326327981326327971
    185/250460/38060/50326448931326448921326448981326448971176 379 805K
    57560327534931327534921327534981327534971
    PE2/PA Insulation Standard Windings (575 V / 60 Hz)
    PNModel No.Turns Per CoilWire Dia.Isolation TypeGroup Conn.Total Wire L (m)Resist. Coil (Ω)Resist. Y∆Resist. DOL
    (kW/HP)Winding Kits(mm)(U1-U2) (Ω)(U1-V1) (Ω)
    130/1753263179999+10+9+101.8/2.8 DR.IIPE2/PAParallel10670.29870.14940.0996
    150/2003263279998+8+8+82.7/4.14950.24540.12270.0818
    185/2503275349996+7+6+72.1/3.3 2DR.II9040.18340.09170.0611
    PE2/PA Insulation Standard Windings (380-415 V/50 Hz / 460 V/60 Hz)
    PNModel No.Turns Per CoilWire Dia.Isolation TypeGroup Conn.Total Wire L (m)Resist. Coil (Ω)Resist. Y∆Resist. DOL
    (kW/HP)Winding Kits(mm)(U1-U2) (Ω)(U1-V1) (Ω)
    130/1753263149997+8+7+82.0/3.1 2DR.IIPE2/PAParallel8500.1910.09550.0636
    150/2003263259996+7+6+72.1/3.3 2DR.II8100.16470.08230.0549
    185/2503264489995+5+6+52.3/3.5 2DR.II7350.1240.0620.0413
    Insulation Resistant (20 °C / 500 VDC)
    New Motor w/o Drop Cable400 >
    Used Motor w/o Drop Cable20 >
    New Motor w/ Drop Cable4 >
    Used Motor w/ Drop Cable1