6" MagForce High Efficiency Motor
6" MagForce High Efficiency Motor
Encapsulated Three-Phase 7.5-60 HP, 460 V 60 HZ
Get the streamlined solution needed for pumping power at maximum efficiency: MagForce™ High Efficiency Motors are engineered for high performance, simple startup and incredible long-term cost savings. Owners and operators benefit from electrical cost savings as a result of 92% efficiency rating in the motor for an investment payback of less than two years in typical duty rate systems*. *Results based on field trial data
Each MagForce High-Efficienc Motor is powered by permanent magnet technology that enables operation at a fraction of the energy consumption when compared to traditional induction designs. When optimized and paired with an innovative Franklin Electric engineered drive, users benefit from intuitive startup and reliable protection for submersible pumping applications.
-
Features and Benefits
- GROUNDBREAKING EFFICIENCY: Powered by MagForce High Efficiency Motor with up to 92% efficiency rating that is 8-12 points (15%) greater than standard induction motor construction. Typical duty rate systems can have a payback* of 1 to 2 years.
- SLASH ELECTRICITY CONSUMPTION: Up to 14% energy savings* compared to traditional induction motors.
- SIMPLIFIED INVENTORY MANAGEMENT: Available motor options cover a wide range of pump horsepower needs (up to 60 hp) with fewer SKUs to manage.
- SMALLER FOOTPRINT: Lighter and easier to handle than standard induction motors.
- INTUITIVE STARTUP: When optimized and paired with a Franklin Electric variable frequency drive, expect easy startups and reliable protection for any project.
- BUILT TOGETHER TO WORK TOGETHER: Rely on components from a single trusted source for the ultimate in operational compatibility and optimized operation.
- FULLY SUPPORTED: Comes fully supported by the industry’s leading Technical Support professionals and Field Service Engineers.
- *Field trial data
Ideal for Long-run Applications
- Groundwater remediation
- Drainage water level control
- Municipal/Utility water supply
- Construction site dewatering
- High volume and industrial livestock operations
- Mine site dewatering and tank level control
- Well supply geothermal HVAC systems
Motor Specifications
- Sand Fighter® models are equipped with Franklin’s robust Sand Fighter sealing system for durability against sand or other abrasives.
- Max 3600 rpm (4-pole, 120 Hz); Nominal 3450 rpm (4 pole, 115 Hz) Maximum temperature winding wire NEMA class 200
- Hermetically sealed windings
- 6” double flange NEMA mounting design
- Field replaceable, factory installed over-molded lead for cable resilience: 13 ft
- Stainless steel shell
- Sand slinger
- Kingsbury-type, water-lubricated, thrust bearing:
- 7.5-30HP – 3,500 lb
- >40HP – 6,000 lb
- Pressure-equalizing diaphragm, spring pre-loaded
- Nominal ambient temperature: 86°F (30°C)
- Cooling flow:
- 7.5-30HP - 0.5 ft/s
- >40HP - 1.6 ft/s
- Max. storage temperature: 5°F to 140°F
- System Supply Voltage: 460 V (120 Hz)
- DOL-start
- Voltage Tolerance: ± 10 % UN
- Motor ingress protection IP68 and insulation class F
- NSF/ANSI 61 Certified
- Rotation counterclockwise facing shaft end (rotation reversible)
- Motors installation orientation: Vertical/horizontal (shaft end heightened)
Related
-
System with SubDrive Connect Plus
HP Drive
Input
VoltageKit
Order
No.Description MagForce High Efficiency Motor SubDrive Connect Plus* Output Filter Options** Motor Only Max Amps
at HP LoadVolts
/HzS.F. Motor
LeadModel No. Max
AmpsFrame
SizeSine Wave Filter NEMA 1/3R 7.5 460 305612911 SubDrive Connect Plus,
MagForce 7.5/10HP2360809566E 11.6 460
/1201.15 DOL
(3)SDCP-SUB1043 18 2 MSD0023A300 10 460 2360809566E 14.2 SDCP-SUB1043 18 MSD0023A300 15 460 305612912 SubDrive Connect Plus,
MagForce 15HP2360809566E 20.5 SDCP-SUB1543 26 MSD0030A300 20 460 305612913 SubDrive Connect Plus,
MagForce 20HP2360849566E 28.9 SDCP-SUB2043 31 3 MSD0035A300 25 460 305612914 SubDrive Connect Plus,
MagForce 25HP2360849566E 34.6 SDCP-SUB2543 39 MSD0045A300 30 460 305612915 SubDrive Connect Plus,
MagForce 30HP2360849566E 41 SDCP-SUB3043 46 MSD0065A300 - The system includes: MagForce High Efficiency Motor with lead and a compatible SubDrive Connect Plus variable frequency drive with pressure transducer and bult-in dv/dt filter. Its easy-to-install platform helps you save time during installation and servicing using an array of setup, monitoring, and troubleshooting solutions.
- *Firmware version 1.7.0 or newer is required for permanent magnet motor (or MagForce) functionality.
- **Sine wave filters are required when using a SubDrive Connect Plus with a permanent magnet motor with lead lengths greater than 1,000’.
System with Cerus X-Drive
HP Drive
Input
VoltageMagForce High Efficiency Motor Cerus X-Drive* Output Filter Options*** Motor Only Max
Amps
at HP
LoadVolts
/HzS.F. Motor
LeadNEMA 3R Panel* NEMA 1 Drive Only dV/dt Filter Sine Wave
FilterModel No. H x Wx D (in) Model No. H x W x D (in) NEMA 1 NEMA 3R NEMA 1/3R 7.5 460 2360809566E 11.6 460
/1201.15 DOL
(3)XS4B007-3A 36.5 x 26
x 16.4CXD-013A-4V 5.1 x 9.8
x 6.7V1K18A01 V1K18A03 MSD0012A300 10 460 2360809566E 14.2 XS4B010-3A CXD-018A-4V V1K25A01 V1K25A03 MSD0016A300 15 460 2360809566E 20.5 XS4B015-3A CXD-024A-4V 7.5 x 12.6
x 7.5V1K27A01 V1K27A03 MSD0023A300 20 460 2360849566E 28.9 XS4B020-3A CXD-032A-4V V1K55A01 V1K55A03 MSD0030A300 25 460 2360849566E 34.6 XS4B025-3A 41.5 x 29
x 16.4CXD-038A-4V V1K80A01 V1K80A03 MSD0035A300 30 460 2360849566E 41 XS4B030-3A CXD-045A-4V 9.8 x 15.8
x 8.2V1K80A01 V1K80A03 MSD0045A300 40 460 2360862166E 56.5 XS4B040-3A CXD-060A-4V V1K80A01 V1K80A03 MSD0065A300 50 460 2360862166E 69.2 XS4B050-3A CXD-073A-4V V1K110A01 V1K110A03 MSD0080A300 60 460 2360862166E 80 XS4B060-3A 46.5 x 29 x 16.4 CXD-091A-4V 11 x 19.7 x 10 V1K110A01 V1K110A03 MSD0080A300 7.5 575 2360809566E 11.6 XP6B007-3A 36.5 x 26
x 16.4CXD-012A-6V 7.5 x 12.6
x 7.5V1K18A01 V1K18A03 MSD0012A300 10 575 2360809566E 14.2 XP6B010-3A CXD-018A-6V V1K25A01 V1K25A03 MSD0016A300 15 575 2360809566E 20.5 XP6B015-3A CXD-024A-6V 9.8 x 15.8
x 8.2V1K27A01 V1K27A03 MSD0023A300 20 575 2360849566E 28.9 XP6B020-3A 41.5 x 29
x 16.4CXD-030A-6V V1K55A01 V1K55A03 MSD0030A300 25 575 2360849566E 34.6 XP6B025-3A CXD-036A-6V V1K80A01 V1K80A03 MSD0035A300 30 575 2360849566E 41 XP6B030-3A 51.5 x 34
x 20.5CXD-045A-6V 13 x 21.7 x 10.8 V1K80A01 V1K80A03 MSD0045A300 40 575 2360862166E 56.5 XP6B040-3A CXD-067A-6V 10.6 x 23.2
x 11.8V1K80A01 V1K80A03 MSD0065A300 50 575 2360862166E 69.2 XP6B050-3A CXD-086A-6V V1K110A01 V1K110A03 MSD0080A300 60 575 2360862166E 80 XP6B060-3A CXD-086A-6V V1K110A01 V1K110A03 MSD0080A300 - The system includes: MagForce High Efficiency Motor with lead and Cerus X-Drive in NEMA 3R panel configurations or as a standalone NEMA drive. The Cerus® X-Drive Variable Frequency Drive (VFD) is Franklin Electric’s all-inclusive drive solution for a variety of markets.
- *NOTE: Firmware version 1.1 or newer is required for permanent magnet motor (or MagForce) functionality.
- **Output filters are required when using an X-Drive with a permanent magnet motor. dV/dt filters cover motor lead lengths up to 800’. A sine wave filter is required for lead lengths greater than 800’
- ***NEMA 3R panels include door-mounted keypad with HOA functionality, a circuit breaker, dV/dt filter, and line reactor or integrated DC Choke
-
Accessories
Accessories Detail Used With Part Number PT-100 Sensors 15HP System (UL and non) SubDrive Connect Plus &
Cerus X-Drive models305327903 30HP (UL and non) 305327903 60HP (UL) Cerus X-Drive models 305327903 60HP (non) 305327903 Pressure Transducer Pressure Transducer, 100PSIG, 4-20mA Cerus X-Drive models PSIG-100-20FT Pressure Transducer, 200PSIG, 4-20mA PSIG-200-20FT Pressure Transducer, 300PSIG, 4-20mA PSIG-300-20FT Optional Cards & Other Modbus TCP/IP Communication Card Cerus X-Drive models CMC-EIP01 I/O Card - Additional 4 digital inputs and 2 transistor outputs EMC-D42A I/O Card - Additional 6 digital inputs EMC-D611A I/O Card - Additional 6 relay outputs EMC-R6AA -
Other
