2640395331 – 10PM- 220-575-120-DOL-3R-PE2 INNEN GROUND
Item: | 2640395331 |
Model: | 10PM- 220-575-120-DOL-3R-PE2 INNEN GROUND |
Type | Sand Fighter |
Ratings |
||
Frequency | 120 Hz | |
Phases | Three-Phase | |
Amps - Service Factor | 339 A | |
Volts | 575 VAC | |
Voltage Tolerance (%) | -10.0% / +10.0% | |
Wire | 3-Wire | |
Thrust Bearing Rating | 13500 lb | |
Lead Length | 21 ft | |
Motor | Rewindable | |
Continuous Duty | Yes | |
Efficiency Service Factor Load [%] | 94.20 % | |
Lead Wire Size | 70 mm² | |
Motor Insulation Classification | Y | |
Poles | 4 | |
Service Factor - 120Hz | 1.15 | |
VFD Required | YES | |
HP | 300 hp | |
Minimum Cooling Flow | 1.5 ft/sec | |
Motor Ambient Temperature Rating Nominal | 86 °F | |
Thrust Bearing Rating | 13500 lb | |
Motor Adapter | Double flange | |
Rotation | Counter clockwise facing the shaft | |
SubTrol Heat Sensor | NO | No |
Materials of Construction |
|
Motor Shaft End - Material | Stainless Steel 1.4462 |
Thrust Bearing | Kingsbury |
Seal | Mechanical Seal |
Diaphragm Material | Ethylene-Propylene-Diene (EPDM) |
Motor Bottom End Bell Material | Cast Iron with E-Coat Paint |
Motor Fill Solution (Water Soluble / Non Toxic) | YES |
Motor Fill Solution | FES93 |
Motor Top End Bell Material | Cast Iron with E-Coat Paint |
Shaft Slinger Material | EPDM |
Stator Ends Material | Carbon Steel |
Stator Fill | Water/Propyleneglycol |
Stator/ Motor Shell Material | 304SS |
Winding Material | Copper/ PE2/PA |
Dimensions |
|
Motor Diameter - Physical Diameter | 9.25" |
Motor Length | 69.65 " |
Product Weight | 772 lb |
Product Weight with Pack | 882 lb |
Carton Length | 88.2 " |
Carton Width | 13.4 " |
Carton Height | 20.2 " |
Shaft End | Keyed |
Other |
|
Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
Electrical Agency Approvals | UL |
Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |