2247038702G – 4C1F(5HP,230,60,OS)
The Franklin Electric Stainless Super 4-inch submersible motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry’s most trusted residential pump motor. Franklin offers a 4-inch submersible motor in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor.
| Item: | 2247038702G |
| Model: | 4C1F(5HP,230,60,OS) |
| Type | Oil Stripper |
Ratings |
|
| HP | 5 hp |
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps - Full Load | 21.3 A |
| Amps - Service Factor | 21.3 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 1500 lb |
| Lead Length | 13 ft |
| Motor | Submersible |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 78.00 % |
| Lead Wire Size | AWG #14 |
| Lead Retainer Method | Lead Jam Nut |
| Motor Insulation Classification | B |
| Poles | 2 |
| S.F. | 1.15 |
| Lead | Yes |
| Motor Ambient Temperature Rating Nominal | 176 °F |
| Thrust Bearing Rating | 1500 lb |
| Rotation | Counter clockwise facing the shaft |
Materials of Construction |
|
| Thrust Bearing | Kingsbury |
| Seal | Mechanical Seal |
| Lead Insulation Material | EPR |
| Diaphragm Material | Fluoroelastomers (FKM, and EPDM) |
| Motor Construction Design | High Thrust |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Motor Fill Solution | Water + Propylene Glycol |
| Motor Top End Bell Material | 316SS |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator Fill | Resin |
| Stator/ Motor Shell Material | 316SS |
| Winding Material | Copper |
Dimensions |
|
| Motor Diameter - Physical Diameter | 3.75" |
| Motor Length | 29.2 " |
| Product Weight | 71 lb |
| Product Weight with Pack | 71 lb |
| Carton Length | 33.75 " |
| Carton Width | 6.5 " |
| Carton Height | 6.25 " |
| Shaft End | Spline |
Other |
|
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Applications | These motors are built for dependable operation in 4” diameter or larger water wells. |
