2347478802G – 4C3F(5HP,380,60,SF)
The Franklin Electric Stainless Super 4-inch submersible motor has been the driving force behind residential and light commercial submersible pumps for decades. Designed and patented in 1950 by our founder, Ed Schaefer, this motor has proven to be the industry’s most trusted residential pump motor. Franklin offers a 4-inch submersible motor in a full line of single- and three-phase voltages, frequencies, and application-specific models. Wherever there is an independent source of clean groundwater, you can find a Franklin motor.
| Item: | 2347478802G |
| Model: | 4C3F(5HP,380,60,SF) |
| Type | Sand Fighter |
Ratings |
|
| HP | 5 hp |
| Frequency | 60 Hz |
| Phases | Three-Phase |
| Amps - Full Load | 9.1 A |
| Amps - Service Factor | 10.4 A |
| Volts | 380 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 3-Wire |
| Thrust Bearing Rating | 1500 lb |
| Motor | Submersible |
| Continuous Duty | Yes |
| Lead Retainer Method | Clamp Style |
| Motor Insulation Classification | B |
| S.F. | 1.15 |
| Lead | Yes |
| Motor Ambient Temperature Rating Nominal | 86 °F |
| Thrust Bearing Rating | 1500 lb |
Materials of Construction |
|
| Seal | Mechanical Seal |
| Diaphragm Material | Nitrile Rubber (NBR) |
| Motor Fill Solution (Water Soluble / Non Toxic) | Yes |
| Shaft Slinger Material | Nitrile Rubber (NBR) |
| Stator/ Motor Shell Material | Stainless Steel |
Dimensions |
|
| Motor Diameter - Physical Diameter | 3.75" |
| Shaft End | Spline |
Other |
|
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Electrical Agency Approvals | UL |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
