6-Inch Submersible Motors

6-Inch Encapsulated High-Temp Motor

6-Inch Submersible Motors

6-Inch Encapsulated High-Temp Motor

Demanding pumping applications have higher requirements. That’s why Franklin’s Hi-Temp Submersible Motors are engineered and tested to deliver exceptional performance in challenging, high-temperature well applications and/or low-flow conditions. 

The 6-inch High-Temp Motor utilizes a distinctive premium encapsulation process and water-soluble coolant to allow dependable, continuous operation in 6" diameter or larger water wells with water temperatures up to 90 ºC (provided minimum allowable flow rates past the motor are maintained). This submersible motor is powered by design and can handle thrust loads 25% higher than a standard motor without oil. Its superior construction comes with water-lubricated radial and thrust bearings to benefit from a maintenance-free operation. 

 

FE_Select_Logo_Tagline_BLK.psd

Available on FE Select

Size. Configure. Quote. Input your performance requirements or specs, and our industry-leading online tool will help you find the right Franklin Electric product for the job.

Size with FE Select US  |  Size with FE Select CA

Overview


Features & Benefits

  • Up to 194 °F (90 °C) ambient temperature
  • 100% increase in upthrust capability at 30 °C
  • 25% increase in downthrust capability at 30 °C
  • Wet Well, Reservoir, Low Flow approved in 12” diameter or larger wells with ambient water
    up to 87 °F (30 °C)
  • High temperature leads
  • Hermetically sealed stator
  • Innovative high temperature winding encapsulation system
  • FES92 exclusive water soluble, high temperature bearing lubrication
  • Double-flange NEMA mounting for ease of handling and pump mounting
  • Stainless steel splined shaft for maximum shaft/coupling contact
  • Full 3450 RPM 60Hz design point for superior pump performance
  • Sand Fighter™ Sealing System
  • Franklin Electric’s exclusive Water-Bloc™ lead connection
  • 316 SS and Y-∆ - consult factory
  • Extended warranty available when used with FE Submonitor overload protection

Order Information


6-Inch Three Phase High-Temp Models

HP Type Volts Hz Item Motor Connection
5 hp Sand Fighter 380 VAC / 460 VAC 50/60 Hz 2766100003 DOL
5 hp 316SS 230 VAC 60 Hz 2766003003 DOL
5 hp 316SS 380 VAC / 460 VAC 50/60 Hz 2766103003 DOL
7.5 hp Sand Fighter 380 VAC / 460 VAC 50/60 Hz 2766110003 DOL
7.5 hp 316SS 230 VAC 60 Hz 2766013003 DOL
7.5 hp 316SS 380 VAC / 460 VAC 50/60 Hz 2766113003 DOL
10 hp Sand Fighter 380 VAC / 460 VAC 50/60 Hz 2766120003 DOL
10 hp 316SS 230 VAC 60 Hz 2766023003 DOL
10 hp 316SS 380 VAC / 460 VAC 50/60 Hz 2766123003 DOL
15 hp Sand Fighter 380 VAC / 460 VAC 50/60 Hz 2766130003 DOL
15 hp 316SS 230 VAC 60 Hz 2766033003 DOL
15 hp 316SS 380 VAC / 460 VAC 50/60 Hz 2766133003 DOL
20 hp Sand Fighter 380 VAC / 460 VAC 50/60 Hz 2766140003 DOL
20 hp 316SS 230 VAC 60 Hz 2766043003 DOL
20 hp 316SS 380 VAC / 460 VAC 50/60 Hz 2766143003 DOL
25 hp Sand Fighter 380 VAC / 460 VAC 50/60 Hz 2766150103 DOL
25 hp 316SS 380 VAC / 460 VAC 50/60 Hz 2766153103 DOL
30 hp Sand Fighter 380 VAC / 460 VAC 50/60 Hz 2766160103 DOL
30 hp 316SS 380 VAC / 460 VAC 50/60 Hz 2766163103 DOL
40 hp Sand Fighter 380 VAC / 460 VAC 50/60 Hz 2766170103 DOL
40 hp 316SS 380 VAC / 460 VAC 50/60 Hz 2766173103 DOL

Explore Franklin Electric’s Extensive Selection of Submersible Turbines

Pair these legendary motors with Franklin Electric’s proven selection of strapped, cast iron, and cast stainless submersible turbines, along with an extensive offering of lineshaft turbines that help you cover almost any pumping application.

Parts & Accessories


6-Inch High-Temp Leads

HP Description Lead Wire Size Item Product Weight
All 6 inch Lead, XLPO, 316 SS, 13 ft, w/Ground AWG #8 305519951 4 lb
All 6 inch Lead, XLPO, 316 SS, 26 ft, w/Ground AWG #8 305519952 9 lb
All 6 inch Lead, XLPO, 316 SS, 50 ft, w/Ground AWG #8 305519955 16 lb
5 - 30 hp Lead, XLPO, 316 SS, 75 ft, w/Ground AWG #8 305519957 24 lb
5 - 30 hp Lead, XLPO, 316 SS, 100 ft, w/Ground AWG #8 305519960 32 lb
5 - 30 hp Lead, XLPO, 316 SS, 125 ft, w/Ground AWG #8 305519962 40 lb
5 - 30 hp Lead, XLPO, 316 SS, 150 ft, w/Ground AWG #8 305519965 48 lb

6-Inch Motor Accessories

Item Description
155440902 Surge Arrestor - Three-Phase - Up to 650 V to Ground
305327903 PT 100 SENSOR - 6-INCH (1/2 - 13 THREADS)
151935902 COUPLING, 6-INCH, #416 SS, 3/4" PUMP SHAFT, 3/16 x 1/8 x 1-3/4 KEY
151935909 COUPLING, 6-INCH, #416 SS, 1" PUMP SHAFT, 1/4 x 3/16 x 1-3/4 KEY
151935921 COUPLING, 6-INCH, #316 SS, 7/8" PUMP SHAFT, 1/4 x 3/16 x 1-3/4 KEY
151935922 Coupling, 6-inch, #316 SS, 3/4" Pump Shaft, 3/16 x 1/8 x 1-3/4 Key
151935929 COUPLING, 6-INCH, #316 SS, 1" PUMP SHAFT, 1/4 x 3/16 x 1-3/4 KEY
151935901 COUPLING, 6-INCH, #416 SS, 7/8" PUMP SHAFT, 1/4 x 3/16 x 1-3/4 KEY