2791039204 – 8H3F(75HP,460/380,6/5)S
The 8-inch High-Temp Motor utilizes a distinctive premium encapsulation process and water-soluble coolant to allow dependable, continuous operation in 8" diameter or larger water wells with water temperatures of up to 75 ºC (provided minimum allowable flow rates past the motor are maintained). This submersible motor is powered by design and can handle thrust loads 25% higher than a standard motor without oil. Its superior construction comes with water-lubricated radial and thrust bearings to benefit from a maintenance-free operation.
Item: | 2791039204 |
Model: | 8H3F(75HP,460/380,6/5)S |
Type | 316SS |
Ratings |
||
HP | 75 hp | |
Frequency | 50/60 Hz | |
Phases | Three-Phase | |
Amps - Full Load | 100 A | |
Amps - Service Factor | 114 A | |
Volts | 380 VAC / 460 VAC | |
Voltage Tolerance (%) | -10.0% / +10.0% | |
Wire | 3-Wire | |
Motor Connection | DOL | |
Thrust Bearing Rating | 10000 lb | |
Lead Length | 13 ft | |
Motor | Encapsulated | |
Continuous Duty | Yes | |
Efficiency Service Factor Load [%] | 83.00 % | |
Protection [IP] | IP68 | |
Lead Wire Size | AWG #2 | |
Motor Insulation Classification | F | |
Poles | 2 | |
S.F. | 1.15 | |
Motor Cooling | Water | |
Minimum Cooling Flow | .50 ft/sec | |
Motor Ambient Temperature Rating Nominal | 167 °F | |
Thrust Bearing Rating | 10000 lb | |
Motor Adapter | Double flange | |
Rotation | Counter clockwise facing the shaft | |
SubTrol Heat Sensor | NO | No |
Materials of Construction |
|
Motor Shaft End - Material | 17-4SS |
Thrust Bearing | Kingsbury |
Seal | Mechanical Seal |
Lead Insulation Material | XLPE |
Diaphragm Material | FKM |
Motor Bottom End Bell Material | 316SS |
Motor Fill Solution (Water Soluble / Non Toxic) | YES |
Motor Fill Solution | FES92 |
Motor Top End Bell Material | 316SS |
Shaft Slinger Material | Nitrile Rubber (NBR) |
Stator Ends Material | 316SS |
Stator Fill | Resin |
Stator/ Motor Shell Material | 316SS |
Winding Material | Copper |
Dimensions |
|
Motor Diameter - Physical Diameter | 7.70" |
Motor Length | 49.8 " |
Product Weight | 436 lb |
Product Weight with Pack | 485 lb |
Carton Length | 67 " |
Carton Width | 9 " |
Carton Height | 17 " |
Shaft Diameter | 1.5 " |
Shaft End | Spline |
Other |
|
Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |