2391056204 – 8C3F(125HP;460/380;6/5;S) 8C3F(93KW;460/380;6/5;S)
Franklin’s 8-inch submersible motors are typically used in large demanding water wells requiring high flow rates or deeper installations. These motors are tough, built to last, and come in a variety of construction options.
Item: | 2391056204 |
Model: | 8C3F(125HP;460/380;6/5;S) 8C3F(93KW;460/380;6/5;S) |
Type | 316SS |
Ratings |
||
HP | 125 hp | |
Frequency | 50/60 Hz | |
Phases | Three-Phase | |
Amps - Full Load | 167 A | |
Amps - Service Factor | 188 A | |
Volts | 380 VAC / 460 VAC | |
Voltage Tolerance (%) | -10.0% / +10.0% | |
Wire | 3-Wire | |
Motor Connection | DOL | |
Thrust Bearing Rating | 10000 lb | |
Lead Length | 13 ft | |
Motor | Encapsulated | |
Continuous Duty | Yes | |
Efficiency Service Factor Load [%] | 87.00 % | |
Protection [IP] | IP68 | |
Lead Wire Size | AWG #4 | |
Lead Retainer Method | Lead Jam Nut | |
Motor Insulation Classification | F | |
Poles | 2 | |
S.F. | 1.15 | |
Motor Cooling | Water | |
Minimum Cooling Flow | .50 ft/sec | |
Motor Ambient Temperature Rating Nominal | 86 °F | |
Thrust Bearing Rating | 10000 lb | |
Motor Adapter | Double flange | |
Rotation | Counter clockwise facing the shaft | |
SubTrol Heat Sensor | YES | Yes |
Materials of Construction |
|
Motor Shaft End - Material | 17-4SS |
Thrust Bearing | Kingsbury |
Seal | Mechanical Seal |
Lead Insulation Material | XLPE |
Diaphragm Material | Nitrile Rubber (NBR) |
Motor Bottom End Bell Material | 316SS |
Motor Fill Solution (Water Soluble / Non Toxic) | YES |
Motor Fill Solution | FES91 |
Motor Top End Bell Material | 316SS |
Shaft Slinger Material | Nitrile Rubber (NBR) |
Stator Ends Material | 316SS |
Stator Fill | Resin |
Stator/ Motor Shell Material | 316SS |
Winding Material | Copper |
Dimensions |
|
Motor Diameter - Physical Diameter | 7.70" |
Motor Length | 68.8 " |
Product Weight | 641 lb |
Product Weight with Pack | 700 lb |
Carton Length | 78.5 " |
Carton Width | 9 " |
Carton Height | 17 " |
Shaft Diameter | 1.5 " |
Shaft End | Spline |
Other |
|
Electrical Agency Approvals | UL |
Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |