3200 Series Submersible Pumps

4" Reduced Diameter

The 3200 Series submersible pumps are designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric’s industry leading submersible 4-inch motor. This reduced diameter pump end makes it ideal for installations where the well is considered encrusted or tight in comparison to a standard 4-inch well. The 3200 Series also offers a hydraulic stage design optimized for greater water and pressure output when installed at deeper well depths. For details on how to become a registered dealer and receive a 5-year warranty, contact your local distributor.

Features
Order Info
Downloads
    • Pump diameter is smaller than a standard 4-inch submersible for easier installation in reduced diameter 4-inch wells.
    • Hex rubber bearing and ceramic shaft sleeve allows sand and abrasives to pass through, virtually eliminating shaft wear and upper bearing failures.
    • Improved hydraulic performance for deeper set depths at all horsepower and flow ratings.
    • Floating stage design allows for maximum efficiency while minimizing the downthrust load that is transferred to the motor.
    • Modified PPO diffuser and disc with 300 Series stainless steel thrust and eye seal protection for durability and abrasion resistance.
    • Acetal impeller provides high performance to increase pressure output while reducing system losses from friction.
    • Removable spring-loaded check valve.
    • Stainless steel pump intake screen and stainless steel cable guard.
    • Maximum water temperature: 120 °F / 49 °C.
    • Powered by corrosion-resistant Franklin Electric submersible 4-inch motor with lightning protection.
  • Thermoplastic Pumps

    GPMHPStagesVolts2-Wire3-Wire
    ModelOrder No.ModelOrder No.Control Box
    50.5131155FR05P4-2W115962105055FR05P4-3W115962105302801044915
    0.5132305FR05P4-2W230962105105FR05P4-3W230962105352801054915
    0.75185FR07P4-2W230962105155FR07P4-3W230962105402801074915
    1225FR1P4-2W230962105205FR1P4-3W230962105452801084915
    70.5101157FR05P4-2W115962107057FR05P4-3W115962107302801044915
    0.5102307FR05P4-2W230962107107FR05P4-3W230962107352801054915
    0.75137FR07P4-2W230962107157FR07P4-3W230962107402801074915
    1187FR1P4-2W230962107207FR1P4-3W230962107452801084915
    100.51111510FRD05P4-2W1159621100510FRD05P4-3W115962110302801044915
    0.51123010FRD05P4-2W2309621101010FRD05P4-3W230962110352801054915
    0.751410FRD07P4-2W2309621101510FRD07P4-3W230962110402801074915
    11910FRD1P4-2W2309621102010FRD1P4-3W230962110452801084915

    Stainless Steel Pumps

    GPMHPStagesVolts2-Wire3-Wire
    ModelOrder No.ModelOrder No.Control Box
    50.5131155FR05S4-2W115963105055FR05S4-3W115963105302801044915
    0.5132305FR05S4-2W230963105105FR05S4-3W230963105352801054915
    0.75185FR07S4-2W230963105155FR07S4-3W230963105402801074915
    1225FR1S4-2W230963105205FR1S4-3W230963105452801084915
    1.5305FR15S4-2W230963105255FR15S4-3W230963105502823008610
    70.5101157FR05S4-2W115963107057FR05S4-3W115963107302801044915
    0.5102307FR05S4-2W230963107107FR05S4-3W230963107352801054915
    0.75137FR07S4-2W230963107157FR07S4-3W230963107402801074915
    1187FR1S4-2W230963107207FR1S4-3W230963107452801084915
    1.5237FR15S4-2W230963107257FR15S4-3W230963107502823008610
    100.51111510FRD05S4-2W1159631100510FRD05S4-3W115963110302801044915
    0.51123010FRD05S4-2W2309631101010FRD05S4-3W230963110352801054915
    0.751410FRD07S4-2W2309631101510FRD07S4-3W230963110402801074915
    11910FRD1S4-2W2309631102010FRD1S4-3W230963110452801084915
    1.52410FRD15S4-2W2309631102510FRD15S4-3W230963110502823008610

    Thermoplastic Pump Ends

    GPMHPStagesModelOrder No.
    50.5135FR05P4-PE96220500
    0.75185FR07P4-PE96220501
    1225FR1P4-PE96220502
    70.5107FR05P4-PE96220700
    0.75137FR07P4-PE96220701
    1187FR1P4-PE96220702
    100.51110FRD05S4-PE96321000
    0.751410FRD07S4-PE96321001
    11910FRD1S4-PE96321002
    • Note: Discharge is 1-1/4” NPT. Maximum diameter across cable guard is 3.90” on all models

    Stainless Steel Pump Ends

    GPMHPStagesModelOrder No.
    50.5135FR05S4-PE96320500
    0.75185FR07S4-PE96320501
    1225FR1S4-PE96320502
    1.5305FR15S4-PE96320503
    2385FR2S4-PE96320504
    70.5107FR05S4-PE96320700
    0.75137FR07S4-PE96320701
    1187FR1S4-PE96320702
    1.5237FR15S4-PE96320703
    2307FR2S4-PE96320704
    3387FR3S4-PE96320705
    100.51110FRD05P4-PE96321000
    0.751410FRD07P4-PE96321001
    11910FRD1P4-PE96321002
    1.52410FRD15P4-PE96321003
    • Note: Discharge is 1-1/4” NPT. Maximum diameter across cable guard is 3.90” on all models