3200 Series Submersible Pumps

3200 Series Submersible Pumps

4" Reduced Diameter

The 3200 Series submersible pumps are designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric’s industry leading submersible 4-inch motor. This reduced diameter pump end makes it ideal for installations where the well is considered encrusted or tight in comparison to a standard 4-inch well. The 3200 Series also offers a hydraulic stage design optimized for greater water and pressure output when installed at deeper well depths. For details on how to become a registered dealer and receive a 5-year warranty, contact your local distributor.

Features
Order Info
Downloads
    • Pump diameter is smaller than a standard 4-inch submersible for easier installation in reduced diameter 4-inch wells.
    • Hex rubber bearing and ceramic shaft sleeve allows sand and abrasives to pass through, virtually eliminating shaft wear and upper bearing failures.
    • Improved hydraulic performance for deeper set depths at all horsepower and flow ratings.
    • Floating stage design allows for maximum efficiency while minimizing the downthrust load that is transferred to the motor.
    • Modified PPO diffuser and disc with 300 Series stainless steel thrust and eye seal protection for durability and abrasion resistance
    • Acetal impeller provides high performance to increase pressure output while reducing system losses from friction.
    • Removable spring-loaded check valve.
    • Stainless steel pump intake screen and stainless steel cable guard.
    • Maximum water temperature: 120 °F / 49 °C.
    • Powered by corrosion-resistant Franklin Electric submersible 4-inch motor with lightning protection.
  • Thermoplastic Pumps

    GPMHPStagesVolts2-Wire3-Wire
    ModelOrder No.ModelOrder No.Control Box
    50.5131155WR05P4-2W115962705055WR05P4-3W115962705302801044915
    0.5132305WR05P4-2W230962705105WR05P4-3W230962705352801054915
    0.75185WR07P4-2W230962705155WR07P4-3W230962705402801074915
    1225WR1P4-2W230962705205WR1P4-3W230962705452801084915
    70.5101157WR05P4-2W115962707057WR05P4-3W115962707302801044915
    0.5102307WR05P4-2W230962707107WR05P4-3W230962707352801054915
    0.75137WR07P4-2W230 962707157WR07P4-3W230962707402801074915
    1187WR1P4-2W230962707207WR1P4-3W230962707452801084915
    100.51111510WRD05P4-2W1159627100510WRD05P4-3W115962710302801044915
    0.51123010WRD05P4-2W2309627101010WRD05P4-3W230962710352801054915
    0.751410WRD07P4-2W2309627101510WRD07P4-3W230962710402801074915
    11910WRD1P4-2W2309627102010WRD1P4-3W230962710452801084915

    Stainless Steel Pumps

    GPMHPStagesVolts2-Wire3-Wire
    ModelOrder No.ModelOrder No.Control Box
    50.5131155WR05S4-2W115963705055WR05S4-3W115963705302801044915
    0.5132305WR05S4-2W230963705105WR05S4-3W230963705352801054915
    0.75185WR07S4-2W230963705155WR07S4-3W230963705402801074915
    1225WR1S4-2W230 963705205WR1S4-3W230963705452801084915
    1.5305WR15S4-2W230963705255WR15S4-3W230963705502823008610
    70.5101157WR05S4-2W115963707057WR05S4-3W115963707302801044915
    0.5102307WR05S4-2W230963707107WR05S4-3W230963707352801054915
    0.75137WR07S4-2W230963707157WR07S4-3W230963707402801074915
    1187WR1S4-2W230963707207WR1S4-3W230963707452801084915
    1.5237WR15S4-2W230963707257WR15S4-3W230963707502823008610
    100.51111510WRD05S4-2W1159637100510WRD05S4-3W115963710302801044915
    0.51123010WRD05S4-2W2309637101010WRD05S4-3W230963710352801054915
    0.751410WRD07S4-2W2309637101510WRD07S4-3W230963710402801074915
    11910WRD1S4-2W2309637102010WRD1S4-3W230963710452801084915
    1.52410WRD15S4-2W2309637102510WRD15S4-3W230963710502823008610

    Thermoplastic Pump Ends

    GPMHPStagesModelOrder No.
    50.5135WR05P4-PE96280500
    0.75185WR07P4-PE 96280501
    1225WR1P4-PE96280502
    70.5107WR05P4-PE96280700
    0.75137WR07P4-PE96280701
    1187WR1P4-PE96280702
    100.51110WRD05P4-PE96281000
    0.751410WRD07P4-PE96281001
    11910WRD1P4-PE96281002
    • Note: Discharge is 1-1/4” NPT. Maximum diameter across cable guard is 3.90” on all models

    Stainless Steel Pump Ends

    GPMHPStagesModelOrder No.
    50.5135WR05S4-PE96380500
    0.75185WR07S4-PE96380501
    1225WR1S4-PE96380502
    1.5305WR15S4-PE96380503
    2385WR2S4-PE96380504
    70.5107WR05S4-PE96380700
    0.75137WR07S4-PE96380701
    1187WR1S4-PE96380702
    1.5237WR15S4-PE96380703
    2307WR2S4-PE96380704
    3387WR3S4-PE96380705
    100.51110WRD05S4-PE96381000
    0.751410WRD07S4-PE96381001
    11910WRD1S4-PE96381002
    1.52410WRD15S4-PE96381003
    • Note: Discharge is 1-1/4” NPT. Maximum diameter across cable guard is 3.90” on all models