96330720 – 7JR1S4-2W230
The 3200 Series submersible pumps are designed so that all parts of the pump end, including the cable guard, fall within the diameter of Franklin Electric’s industry leading submersible 4-inch motor. This reduced diameter pump end makes it ideal for installations where the well is considered encrusted or tight in comparison to a standard 4-inch well. The 3200 Series also offers a hydraulic stage design optimized for greater water and pressure output when installed at deeper well depths.
| Item: | 96330720 |
| Model: | 7JR1S4-2W230 |
Ratings |
|
| HP | 1 hp |
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps - Service Factor | 10.4 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 2-Wire |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 64.00 % |
| Lead Retainer Method | Lead Jam Nut |
| Flow | 7 gpm |
| Shut Off 60 Hz | 586 ft |
| Stages | 18 |
| Motor Ambient Temperature Rating Nominal | 86 °F |
Liquid |
|
| Maximum Fluid Temperature | 120 °F |
Materials of Construction |
|
| Pump Body Material | AISI 304 Stainless Steel |
| Impeller Material | Acetal |
| Motor Bracket Material | Stainless Steel |
| Check Valve | Yes |
| Discharge Material | Stainless Steel |
| Intake Screen Material | Stainless Steel |
| Thrust Bearing | Kingsbury |
| Lead Insulation Material | XLPE |
| Cable Guard Material | Stainless Steel |
Dimensions |
|
| Discharge | Threaded - FNPT |
| Discharge Diameter | 1.25 " |
| Product Length | 32.9 " |
| Diameter With Cable Guard | 3.75 " |
| Motor Length | 11.73 " |
| Pump Length | 22.6 " |
| Product Weight | 37 lb |
Other |
|
| Component Motor Part Number | 2445089003GS |
| Component Pump Part Number | 96340702 |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Applications | Groundwater pumping in clean water well systems ideal for tight well applications 4" and greater |
