95201525 – 15JV15P4-2W230
The standard J-Class Series V submersible well pump features unique hydraulics that improve efficiency and minimize wear even when pumping abrasives. Discharge and motor brackets are available in thermoplastic or stainless steel with a removable check valve system. This submersible well pump series is available in 5, 7, 10, 15, 20, and 25 gpm, 1/2 - 5 horsepower.
| Item: | 95201525 |
| Model: | 15JV15P4-2W230 |
Ratings |
|
| HP | 1.5 hp |
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps - Service Factor | 13.1 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 2-Wire |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 67.00 % |
| Lead Retainer Method | Lead Jam Nut |
| Flow | 15 gpm |
| Shut Off 60 Hz | 467 ft |
| Stages | 11 |
| Motor Ambient Temperature Rating Nominal | 86 °F |
Liquid |
|
| Maximum Fluid Temperature | 120 °F |
Materials of Construction |
|
| Pump Body Material | AISI 304 Stainless Steel |
| Impeller Material | Acetal |
| Motor Bracket Material | Thermoplastic |
| Check Valve | Yes |
| Discharge Material | Thermoplastic |
| Intake Screen Material | Thermoplastic |
| Thrust Bearing | Kingsbury |
| Lead Insulation Material | XLPE |
| Cable Guard Material | Thermoplastic |
Dimensions |
|
| Discharge | Threaded - FNPT |
| Discharge Diameter | 1.25 " |
| Product Length | 32.54 " |
| Diameter With Cable Guard | 3.9 " |
| Motor Length | 15.12 " |
| Pump Length | 17.44 " |
| Product Weight | 40 lb |
Other |
|
| Component Motor Part Number | 2443099004GS |
| Component Pump Part Number | 95211503 |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Applications | Groundwater pumping in clean water well systems 4" diameter and greater |
