93782520 – 25FA1P4-2W230
The standard FPS 4400 4-inch submersible pump features the new TRI-SEAL floating stage system. This new stage system improves efficiency and protects against wear when pumping abrasives (sand).
| Item: | 93782520 |
| Model: | 25FA1P4-2W230 |
Ratings |
|
| HP | 1 hp |
| Frequency | 60 Hz |
| Phases | Single-Phase |
| Amps - Service Factor | 10.4 A |
| Volts | 230 VAC |
| Voltage Tolerance (%) | -10.0% / +10.0% |
| Wire | 2-Wire |
| Motor | Encapsulated |
| Continuous Duty | Yes |
| Efficiency Service Factor Load [%] | 64.00 % |
| Input Phase | Single-Phase |
| Lead Retainer Method | Lead Jam Nut |
| Maximum Flow Rate - 60 Hz | 30 gpm |
| Minimum Flow Rate - 60 Hz | 15 gpm |
| Flow | 25 gpm |
| Shut Off 60 Hz | 222 ft |
| Stages | 6 |
| Motor Ambient Temperature Rating Nominal | 86 °F |
Liquid |
|
| Maximum Fluid Temperature | 120 °F |
Materials of Construction |
|
| Pump Body Material | AISI 304 Stainless Steel |
| Impeller Material | Acetal |
| Motor Bracket Material | Thermoplastic |
| Check Valve | Yes |
| Discharge Material | Thermoplastic |
| Intake Screen Material | Thermoplastic |
| Thrust Bearing | Kingsbury |
| Lead Insulation Material | XLPE |
| Diffuser Material | Noryl with 30% Fiberglass |
| Cable Guard Material | Thermoplastic |
Dimensions |
|
| Discharge | Threaded - FNPT |
| Discharge Diameter | 1.25 " |
| Product Length | 26.61 " |
| Diameter With Cable Guard | 3.9 " |
| Motor Length | 11.73 " |
| Pump Length | 14.88 " |
| Product Weight | 31 lb |
| Pump Diameter | 3.9 " |
Other |
|
| Component Motor Part Number | 2445089003GS |
| Component Pump Part Number | 93792515 |
| Drinking Water Agency Approvals | ANSI/NSF Standard 61 |
| Warranty Standard Time | 12 Mo. from Date of Install / 24 Mo. from Date of Manufacturing |
| Applications | Groundwater pumping in clean water well systems 4" diameter and greater |
