SP Series Horizontal Split Case
SP Series Horizontal Split Case
The SP splitcase pumps are used in a variety of commercial, industrial & municipal applications. This heavy wall, Francis design, enclosed, bronze impeller provides a very broad operating range. The casing features an exclusive Thru-Bore line boring machining operation that greatly simplifies manufacturing and maintenance. Bearing & bearing housings can be inspected and/or replaced without removing the top part of the casing. The rotor assembly also features completely removable and replaceable packing housings/seal chambers with a replaceable vortex suppressor. The centerline of the pump has also been increased to ensure that suction and discharge flanges do not interfere with the pump foundation. Each model features 250# cast dimensional flanges and 420 stainless steel shafting.

-
Performance Specifications
- Flows To: 22,000+ GPM (5,000 m³/hr)
- Heads To: 550 Feet (168 m)
- Temperatures To: 300ºF (149ºC)
- Pressure To: 238 psi (1,640 kPa)
- Speed Ranges: 500 RPM To 3600 RPM
- Size Range: 2.5×3-10 – 20x24-22
Features
- Cast iron casing/bronze impeller
- Exclusive Thru-Bore casing that allows packing housings/seal chambers to be removed with the rotor assembly
- Bearings & bearing housings can be inspected and/or replaced without removing casing top
- Grease lubricated bearings with optional oil lubrication
- Oil lip sealed bearings with optional bearing isolators
- Fully removable rotor assembly
- Packing housings/seal chambers are removable with rotor assembly
- Packing standard with optional FPS-Pumps exclusive Carbon/Silicone-Carbide/Viton mechanical seal or optional single or double cartridge mechanical seal
- Multi-vane, enclosed, high efficiency impeller with broad band operating range
- Bronze, API style, stepped case wear rings
- 125# suction/125# discharge flange with 250# cast dimensions standard
- Drilled & tapped suction & discharge flanges for easy connection to system piping
- Suction & discharge gauge connections standard
- Turned, ground and polished 420 stainless steel shaft standard
- 50,000+ hour minimum L10 bearing life standard
- Heavy duty, 304 stainless steel shaft sleeves with exclusive external o-ring groove
- Single row inboard and single row outboard bearings with optional double row at either location
Available Metallurgies
- Cast iron, ductile iron, all bronze, all 304 stainless steel, all 316 stainless steel
-
Manuals